d&b 10A - Manual (Page 5)

2.1. Product description
The 10S, 10A and 10AL and their "D versions" are a family of high
performance 2-way loudspeakers employing a single 10” driver in
a bass-reflex enclosure and different HF sections for a wide range
of installed sound applications. All models are lightweight passive
designs using neodymium drivers and large horns for accurate
pattern control.
The 10A and 10A-D are the array versions of this family providing
rotatable dispersion characteristics of 75° x 50° (10A) or 110° x
55° (10A-D). Both loudspeakers employ a 1.4” exit compression
driver. The cabinets are equipped with an integrated rigging
system for the design of vertical arrays providing application
specific dispersion characteristics.
With a frequency response extending from 60 Hz to 18 kHz, the
cabinets can be used as full range systems or supplemented by
different subwoofers of the xS- or xA-Series.
The enclosures are constructed from marine plywood with an
impact resistant black paint finish. The fronts of the cabinets are
protected by a rigid metal grill backed by an acoustically
transparent foam.
The cabinets are Ball Impact Resistant according to DIN 18032-3.
Rigging components
10A/10A-D cabinets are connected to form a vertical array each
using the Z5416 Connector plates 10A. Splay angles can be set
between 25° and 60° with 5° increments. A vertical array may
consist of up to three 10A cabinets. 18A or 27A subwoofers can
be integrated into the array.
Vertical arrays are supported using the Z5414 Flying bar xA and
a pair of Z5413 Flying bar connector plates xA.
Note: For approved configurations as well as safety and
mounting instructions, refer to the respective rigging manual.
Cabinet options
The weather resistant version (WR) is suitable for outdoor use
(IP34, vertical aiming up to +15°). The cabinets have an impact
and weather protected black PCP (Polyurea Cabinet Protection)
finish.
Fig. 1: 10A/10A-D loudspeaker
Rigging example:
10A array with Z5415 Flying bar adapter xA,
Z5414 Flying bar xA, Z5413 Flying bar connector plate xA
and Z5416 Connector plate 10A.
2. 10A/10A-D loudspeaker
d&b 10A/10A-D Manual (1.1 EN) 5