Dual XDVD8182 - Manual (Page 17)

XDVD8182 OPERATION
16
Mode
Optional Mode Selection
Volume
Mute
Audio Adjustment
from front panel
Audio Adjustment
from Remote
Press MODE to select between TUNER, DVD, AV1, and CAMERA inputs.
Modes of operation are indicated in the OSD (On Screen Display) and
secondary LCD.
With the monitor open, press the screen to display the OSD menu bar and
press TUNER, DVD, AV1 or CAMERA in the MAIN menu page to select the
desired source.
Adjust VOLUME using rotary encoder or the VOL   buttons (00-40).
Press MUTE to silence the audio; will appear in the OSD.
Press MUTE again to cancel.
Press in VOLUME rotary knob on left front panel,
Press in VOLUME again to advance to desired parameter to be changed,
Turn VOLUME rotary Q or P to adjust to desired level,
Press in VOLUME to advance to next selection,
Press and hold the VOLUME button on the front panel to exit.
Note: 6-Channel audio is only
adjustable when "Full 6CH" mode
is selected. Refer to page 44 for
more details.
Press the SEL button,
Press the   buttons on the remote to select an item to be adjusted,
Press  or  to adjust the desired setting,
Press the ESC button on the remote control to exit the audio control menu.
Notes: The Bass and Treble levels are only adjustable when EQ is set
to“User” mode. The Loud function compensates for deficiencies in sound
ranges at low levels. When the Loud function is on, LOUD is displayed on the
screen.
ltem A djustable Range
Master Volume
Front Left Channel Volume
Rear Right Channel Volume
Center Channel Volume
Subwoofer Volume
00 to 40
-10 to +10
Front Right Channel Volume -10 to +10
Rear Left Channel Volume -10 to +10
-10 to +10
-10 to +10
-10 to +10
6-Channel Audio Settings
00
L
00
00
00
00
R
R
F
L
2-Channel Audio Settings
General Operation