COMMELL CES-470E - Manual (Page 15)

CES-470 User’s Manual
15
2.4
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
2-3 Clear CMOS
1-2 Normal Operation
Default setting
2.5
The module integrates with one Intel 82562ET Ethernet PHY. The Intel 82562ET
supports triple speed of 10/100base-T, with IEEE802.3 compliance and Wake-On-LAN
supported.
1
3