COMMELL LP-180 - Manual (Page 18)

LP-180 User’s Manual
- 16 -
JAT
2.5
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, please remove battery to clear (reset) the CMOS to its
default values.
The board has a jumper to switch AT power mode (automatic power on) or standard
ATX mode.
Jumper: JAT
Type: onboard 3-pin jumper
JAT Mode
1-2 AT Mode
2-3 ATX Mode
Default setting
Jumper: JRTC
Type: onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
Battery
3 1
JRTC
3 1