COMMELL LV-671CM6 - Manual (Page 21)

LV-671Z User’s Manual Hardware Setup
2.7 Compact Flash Interface
The board supports Compact Flash Type II socket for storage flash disk only, the jumper
JCFSEL can let you to setup the flash card operate on secondary master or slave mode.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL Mode
1-2 Master
2-3 Slave
Default setting
Tested Compact Flash Disk
Manufacture Capacity
LEXAR 16MB
DigitFab 32MB
RiDATA 256MB
HAGIWARA SYS-COM 512MB
Sandisk 2GB
CF
Compact Flash Interface 21