COMMELL LE-575 - Manual (Page 18)

LE-575 User’s Manual
18
2.5
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
The board has a jumper to switch AT power mode (automatic power on) or standard ATX
mode (manual power on).
Jumper: JAT
Type: Onboard 3-pin jumper
JAT Mode
1-2 AT mode
2-3 ATX mode
Default setting
JRTC
3
1
JAT
3 1