Dolby Laboratories DVD- 2OO3 - Manual (Page 8)

DVD Player + TV/VCR Combination
1. Insert the audio cables to the AUDIO OUT L (left=white) and R (right=red) jacks on the back of your DVD Player,
and into the corresponding AUDIO IN jacks on your VIDEO RF MODULATOR.
2. Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD player, and into the Video Input
jack on your VIDEO RF MODULATOR.
3. Insert the RF MODULATOR’S antenna cable (not included) into the ANTENNA jack on the back of your TV/VCR
player, and to the TV OUT jack of your VIDEO RF MODULATOR.
4. Insert the AC power cord into an AC outlet.
5. Go to Page 20 for playing DVDs (discs).
CONNECTIONS
NOTE: A Video RF Modulator is
needed for any TV/VCR
combined set which do
not have VIDEO & AUDIO
inputs jacks. Some TV/VCR
sets have VIDEO & AUDIO
inputs, for these sets you
do not need an RF
Modulator.
7
NOTE: On some combination TV/
VCR sets, you may have to
unplug the VCR cable for
the DVD set to operate
properly.
IB-DVD2003-COMPUSA-E-061202