Channel Master Advantage 100 (3020) - Manual (Page 9)

7
(See Fig. 4) NOTE: Do not attach transmission wire or
balun to these points. Transmission wire or balun are
attached to the bottom terminals of the folded UHF
dipole as shown in Fig 5.
Phasing Rod
Terminal
Dipole
Fig 4
4. Attach transmission wire (or balun, if coax installation)
to tap-off terminals at the bottom of the UHF dipole, as
shown in Fig. 5 (or 6 if a straight UHF screw dipole).
Straight
UHF Dipole
Matching
Transformer
Coaxial
Cable
Folded
UHF Dipole
Tap-Off Terminals
Coaxial Cable
Matching Transformer
Fig 5