Brennenstuhl Heat Detector BH 1201 - Manual (Page 11)

11
BH 1201 Directions for use
Installation
• Choose the areas for installation.
• Take the Mounting Bracket and mark 2 holes on
the ceiling or wall.
• Drill holes in the 2 key positions as marked.
• Insert plastic screw anchors in the holes and put
Mounting Bracket against wall surface.
• Insert a tighten mounting screws until mounting
Bracket is fully fixed.
• This alarm is a tight-closed it which cannot be
opened. Please insert battery onto the
compartment on back of housing.
H
a
ll
Dining room
Living room
Kitchen Family room
Garage
W.C. Up
Main Level
037309 Hitzemelder BH 1201 18.07.14 11:55 Seite 11