Brennenstuhl Power Jet-Light ELP 436 IP54 spotlight 5m H07RN-F 3G1,5 4x36W 4x2850lm Energy efficiency class B - Manual (Page 6)

6
Power Jet-Light ELP 336 / ELP 436 Operating Instructions
Introduction
Please read these operating instructions carefully and completely before use. They are
part of your product and contain important information concerning its operation and
handling. All precautions are to be observed when using this product. Ensure that the
correct voltage is provided, before the start of operation. If you have any questions need
clarification on the handling of the product, please contact your dealer or service center.
Please retain these instructions and pass them on to third parties if necessary.
Intended use
This splash-proof work lamp is suitable for both indoor and outdoor use. With its power
cord with plug, it is ready for connection. The polycarbonate cover is impact-resistant.
The lamp can be installed and placed onto all normally inflammable surfaces. It also
serves as power distrubution by using the socket outlets on the backside.
Any other use than the above-mentioned or any modification is not permitted and can
result in damages. In addition it can lead to danger to life, injuries as well as technical
malfunctions (such as short circuits, fire, electric shock, etc.).
Package contents
Immediately after unpacking, the package contents must be checked for completeness.
Furthermore, check the unit itself for proper condition.
1 Flat lamp, model ELP 336 or ELP 436 (see technical label on the lamp)
1 Operation Instructions manual
Technical data
Model: ELP 336 ELP 436
Nominal voltage: 220-240 V~ 50 Hz 220-240 V~ 50 Hz
Max. load: 3500 W 3500 W
Illuminant: 3 x 36 W, 2G11 4 x 36 W, 2G11
Power input: approx. 3 m H07RN-F 3G1.5 approx. 5 m H07RN-F 3G1.5
Protection rating: I I
Type of protection: IP 44 IP 54
350mm
490mm
279mm
125mm
513mm 122mm
060810 Jet Light ELP 236_336_436_060810 BA_Power Jet-Light ELP 336_ELP 436 06.12.13 13:45 Seite 6