beautypg.com

Dodge 2007 Ram Chassis Cab User Manual

Page 375

background image

When changing a rear wheel, assemble the jack drive
tube to the jack and connect the drive tube to the
extension tube. Securely place the jack under the sway
bar bracket (unless both tire’s are flat on one side, then
place jack under shock bracket) facing forward in vehicle.
Connect the jack tube extension and lug wrench.

Before raising the wheel off the ground, make sure that
the jack will not damage surrounding truck parts and
adjust the jack position as required.

NOTE:

If the jack will not lower by turning the dial

(thumb wheel) by hand, it may be necessary to use the
jack drive tube in order to lower the jack.

WHAT TO DO IN EMERGENCIES

375

6