Dual MXD55 - Manual (Page 6)

6
MXD55 OPERATION
General Operation
Press and hold DISP then press TUNE ll to select function
priority display. "FREQ" will momentarily appear in the display.
Radio frequency (tuner modes) or CD elapsed time/track (CD
player mode) will be displayed by default. Clock is accessed
by pressing DISP momentarily.
Press and hold DISP then press TUNE nn to select time
display priority. "TIME" will momentarily appear in the display.
Clock will be displayed by default. Radio frequency or CD
elapsed time/track is accessed by pressing DISP momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESET 1 to turn clock
priority on/off. "ON CLOC" or "NO CLOC" will momentarily
appear in the display.
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs. The
RESET button is located behind the faceplate.
Press rotary encoder to select between Volume (default),
Bass, Treble, Balance & Fader.
Press rotary encoder until BAS appears then rotate encoder
left/right to adjust (-6 minimum / +6 maximum).
Press rotary encoder until TRE appears then rotate encoder
left/right to adjust (-6 minimum / +6 maximum).
Press rotary encoder until BAL appears then rotate encoder
left/right to adjust (L12-0-R12) 00 represents equal balance.
Press rotary encoder until FAD appears then rotate encoder
left/right to adjust (R12-0-F12) 00 represents equal fader.
Individual Bass and Treble settings are retained in memory
for AM, FM, Weatherband, CD, and AUX modes. This allows
you to save the Bass and Treble settings separately for each
mode. For example, FM tuner mode can have Bass +3 and
Treble -1 while CD mode can have Bass +2 and Treble +2.
Programmable Display
Priority
Programmable Clock
Priority
Reset
Audio
Bass
Treble
Balance
Fader
Source Audio Memory