Bem Wireless Mobile Speaker - Manual (Page 5)

8 9
Connect the Mini USB jack to the USB charging port on the unit. The
charging indicator on the Mobile Speaker will light up while charging
It will take about 2 hours to fully charge the Mobile speaker
Charging Indicator Light Modes
•
Red LED / Flashing Fast: Battery is low, charge the unit soon.
•
Red LED / Flashing Slow: Mobile Speaker is charging
•
Green LED: Battery is fully charged
Note: if the unit has not been used in the past 7 days please charge
for 10 minutes before using the Mobile Speaker.
Troubleshooting
Issue: Pairing is unsuccessfully after multiple attempts
Solution:
•
Check if the Bluetooth© indicator light is on. If the indicator
light is off, please press the power button to turn the unit on.
If the Bluetooth©
indicator light still doesn’t come on after
pressing the power button, please charge the unit.
•
Check for other Bluetooth© devices around the surroundings
that may interfere with searching and turn devices off.
•
Power off and then power on the unit to restart the Bluetooth©
Operation Details
(cont.)
function of the unit or your Bluetooth device
•
Unplug any cables plugged into the AUX IN, restart all devices
and then attempt pairing again.
Issue: Interference or static during playback
Solution:
•
Avoid using the device between concrete or other building
structures that may interfere with the signal.
•
Please check if the battery level of the unit and the Bluetooth©
device and charge if necessary.
For more troubleshooting help go to http://bemwireless.com
Maintenance
Please follow the instructions below for cleaning your Mobile Speaker
•
Power off the unit
•
Use a soft, dry, lint-free cloth and wipe gently
•
Do not use alcohol, benzene, thinners or other chemical
detergents as these can cause the casing to be warped or
discolored