Playing video and audio discs, Turning on the player, To turn on the player – Dynex DX-PDVD7 User Manual

Page 10: Playing discs, To load and play a disc, Pausing discs, To pause a disc

Playing video and audio discs

2 To use the remote control, point it at the remote sensor on the player. (Operate in the

range of 10 feet (3.3 meters) and 60° ).

3 Remove the batteries if the remote control will not be used for an extended period of

time.

Tip: Generally, batteries last for about one year. Replace the batteries if the remote control

does not work.

Playing video and audio discs

Turning on the player

To turn on the player:

1 Open the LCD screen.
2 Turn on the player. The power LED lights green and the LCD screen turns on.

Playing discs

To load and play a disc:

1 Press the OPEN button to open the disc tray.
2 Hold the edges of the disc and place the disc in the center of the tray with the label

side up.

3 Press the OPEN button to close the disc tray. The player starts playing the disc.
4 Turn the VOLUME knob to adjust volume (even when using headphones).

If the player is connected to a TV or an amplifier, adjust the volume on the connected
device.

5 Stop playback by pressing the STOP button on the player or remote control.

Pausing discs

To pause a disc:

1 When playing a disc, press

(play/pause) to pause playback.

2 Press

(play/pause) again to resume playback.