Audio Solutions AS-RC3260 - Manual (Page 2)

2
Introduction
Congratulations on the purchase of your new Audio Solutions™ AS-RC3260 Rolling Cart. For maximum
benefit, please read the entire manual before beginning installation.
NOTE:
This rolling cart has been designed to work with the Audio Solutions™ 2.1 or 3.1 Audio Mount™.
This cart will also work directly with most 32 to 60 inch Plasma, LCD and LED televisions with a maximum
weight of 132lbs (60kg).
Safety Instructions
Please read this entire manual carefully before assembling this unit and mounting the television to avoid
bodily injury and/or any property loss. If you do not understand these directions, or have any doubts about
the safety of the installation, please call a qualified contractor or contact the Audio Solutions™ customer
service department @ 1-866-839-9187. Please check carefully to ensure there are no missing or defective
parts. Our customer representatives can quickly assist you with installation questions and missing or
defective parts. Replacement parts for products purchased through authorized dealers will be shipped to
you directly. Do not attempt to use any parts not provided by the manufacturer. Using other screws could
cause injury or property loss. Never use defective parts, as improper installation may cause damage or
serious injury. Do not use this product for any purpose not explicitly specified by Audio Solutions™. Audio
Solutions™ cannot be liable for damage or injury caused by incorrect mounting, incorrect assembly, or
incorrect use.
•
Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• WARNING: Use only the supplied screws intended for the current application to avoid personal injury
or property damage.
Opening the Package
The AS-RC3260 Rolling Cart and accompanying hardware have been carefully packed in a carton designed
to protect it from transportation damage. After opening the carton, check that the components are in good
condition and that all listed contents are included.
GettInG Started