Atlona AT IR CS RX - Manual (Page 2)

Signal (S)
Ground ( )
Power (P)
AT-UHD-EX-70C-TX
AT-UHD-EX-70C-RX
AT-IR-CS-TX
Emitter
AT-IR-CS-RX
Receiver
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
RS-232
RX TX
IR IN
S
IR OUT
S - +
CAT5e/6/7 OUT HDMI IN
FW
DC 48V IN
LINK
POWER
AT-UHD-EX-70C-TX
FW LINK
POWER
AT-UHD-EX-70C-RX
RS-232
RX TX
IR IN
P S
IR OUT
S
CAT5e/6/7 IN HDMI OUT
Introduction
The Atlona IR Receiver Cable for POE Extenders provides greater distance and better IR rejection
from sources such as: plasma, CFL, and LCD panels.
Features and Specifications
Mounting and Placement
Captive Screw
Connection Diagram
• Frequency range from 30 to 60 kHz
• Distance up to 10m w/no interference on axis
*Operational distance may vary due to interference from IR radiating sources
Ex. Sunlight, CFL, LCD, or Plasma displays
• Reception Angle: +/- 45° off axis
• Dimensions (H x W x D)
10 x 62 x 10 (mm)
0.39 x 2.44 x 0.39 (inch)
• Red status LED indicator for quick verification the IR receiver is picking up the IR remote’s signal
• Power Requirement: 12V DC, 20mA -- Maximum current output: 100mA -- Signal level: 10.8V
To mount the receiver, peel the back off and affix it to a
clean surface.
The receiver may be placed anywhere, as long as it is in direct
line of sight of the remote.
* Designed for select Atlona products
** For warranty information see http://www.atlona.com/marketing/img/limited_warranty/