Panel description, Front panel back panel – Atlona AT HD570 V4 User Manual

Page 4

1. HDMI IN - Connect the HDMI source here (such as DVD player or Set-Top-Box)
2. Audio dip switch - Switch between bitstream (such as Dolby TrueHD or DTS-HD Master Audio),

LPCM 5.1/7.1 Ch, and PCM 2Ch

3. HDMI VIDEO -

On: Follows EDID of the connected display

Note: Audio and video will be the highest common video and audio between the source and display

Note: If the source has no audio, then no audio will pass ex. projector

Off: Will pass 2Ch audio EDID, no matter what the display reports

Note: 2Ch audio will pass even if there is no display connected

Note: Highest common video will still pass if a display is connected

4. POWER LED - Illuminates when receiving power
5. DC 5V POWER - Plug the included power supply here

1. HDMI OUT - Connect HDMI output to a video display or AVR
2. MULTICHANNEL OUT - Supports pass through of 5.1 and 7.1 LPCM
3. OPTICAL OUT - Pass through support of Dolby Digital, DTS 5.1, and 2Ch PCM

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

DC 5V

OPTICAL OUT

HDMI OUT

HDMI IN

POWER

HDMI VIDEO

MULTICHANNEL OUT

LS/RS

LB/RB

AT-HD570

LFE/C

L/R

BITSTREAM

LPCM

5.1/7.1CH

2CH

OFF