Atlona AT HD4 SI40SR V3 - Manual (Page 4)

4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Panel Description
Transmitter
Receiver
1. MODE: 0 - EDID HD (up to 1080p@60) 2D video & 7.1ch audio
1 - EDID HD (up to 1080p@60) – 2D video & 2ch audio
2 - EDID HD (1080p@60) - 2D video & 7.1ch audio
3 - EDID HD (1080p@60) - 2D video & 2ch audio
4 - EDID HD (1080p@60) - 3D video & 7.1ch audio
5 - EDID HD (1080i@50/60)(720p@50/60) - 2D video & 2ch audio
6 - EDID HD (1080p@60) - 3D video & 2ch audio
7 - EDID learning mode (See page 5 for instructions)
2. HDMI In: Connect HDMI source here
3. +5V DC: Connect to 5V DC power supply
4. CAT Out: Connect to the CAT in of receiver with a category cable
1. +5V DC: Connect to 5V DC power supply.
2. CAT IN: Connect category cable from the transmitter’s CAT out
3. EQ: The 8-level equalization dial varies from MAX (long distance) to MIN (short distance).
Adjust the dial from MIN to MAX until the signal is stable.
4. HDMI OUT: Connect to an HDMI display
1 2 3
3
4
4 1 2