Atlona AT HDRX - Manual (Page 4)

4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Panel Description
Front Panel
1. CAT5e/6/7 IN Port: Connect CAT5e/6/7 cable from a compatible transmitter here.
Ex. AT-HDTX (recommended), PRO3HD Matrix Switchers, and more
Back Panel
1. Firmware Update Port: Use Mini USB to USB cable to connect to a Windows computer to update.
2. HDMI OUT Port: Connect to a display or AVR.
3. Yellow Link LED: Signal Indicator for the CAT5e/6/7 port. LED will remain solid unless there is an
issue with the cable or signal then it will blink.
4. Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking
power is intermittent or there is a problem with the cable. If LED is off, no power is passing to
the receiver (check to make sure the CAT5e/6/7 cable is connected fully or that the transmitter is
plugged in).
1
1 2 3
4