Atlona AT VGA RS300SRS - Manual (Page 5)

3
PANEL DESCRIPTIONS
AT-VGA-RS300S
Front Panel
1. IR-Blaster: connect to IR blaster for IR pass-through from AT-VGA-RS300R to AT-VGA-RS300S
2. RS-232: connect to a RS-232 signal source or receiver
3. Stereo IN: connect to analog audio source
4. S/PDIF IN: connect to digital audio source
5. Push-in button: select between S/PDIF and analog stereo audio [button down-S/PDIF, button
up-Stereo]
6. VGA IN: connect to a VGA input source or a component video source via a VGA-component
break cable
7. IR-Receiver: connect to IR receiver for IR pass-through from AT-VGA-RS300R to AT-VGA-RS300R
1 2 3 4 5 6 7