Atlona AT DVI MATRIX - Manual (Page 15)

Atlona Technologies www.atlona.com 15
5.9 Cusome Code Tab
Select between ASCII and HEX format command codes ( for command details, please refer
to section)
Help: Displays the list of command codes.
Send: Sends out the typed command codes.
For example, to transfer the video and audio signals from the input channel No.1 to the
output channel No.7, and the audio signals from the input channel No.2 to the output channel
No.4, just perform the following steps below.
1. Select the “ASCII” as the command codes format;
2. Input the command codes “1B7.2A4.” at the blank of Codes;
3. Click the button “Send” to perform the commands.