Atlona AT HD V24M V2 User Manual

Page 4

Toll free: 1-877-536-3976

Local: 1-408-962-0515

atlona.com

PANEL DESCRIPTIONS

• 2x4 HDMI Matrix Switcher: 2 HDMI Inputs To 4 HDMI Outputs,

• Input Signals: Video (TMDS) 0.5~1.0Vpp, DDC 5Vpp

• Signal Supports : HDMI Standard, DVI and HDCP Compliant

• Video Supported: HDMI and DVI formats up to 1080p or 1920x1200

• Audio Supported: DTS-HD Master Audio, Dolby True -HD & Dolby Digital Plus

• Supports digital video standards such as:

RGB/YCBCR: 24/30/36-bits

YCBCR: 8/10/12/16/20/24-bits

Double data rate interface for RGB/YCBCR: 12/15/18-bits

• Controls: IR, IR EXT, RS232, and Select buttons on the front panel

• Data Rates: 250Mbps to 2.25Gbps.

• IR Extender Distance: 1000ft maximum.

• IR frequency: 38KHz.

• Safety Approvals: CE, FCC, RoHS.

• Power Supply: 12V DC

• Use Universal Switch Type 50/60Hz,100/230V

1. Front Panel

1. POWER SWITCH. The power switch turns the unit on and off. The LED will illuminate red to indicate

that the switcher is ON
2. INPUT SOURCES STATUS DISPLAY. Input sources 1 to 2 LEDs illuminate blue to indicate desired

video source is present on that input.
3. OUTPUT SOURCES STATUS DISPLAY. Output Status shows by LED display.
4. SOURCES SELECT BUTTONS. Separate outputs 1 ~ 2 source select buttons are provided. Select

sources are 1-HDMI, 2-HDMI.
5. IR SENSOR. The IR sensor receives IR commands from the supplied remote control.
6. SOURCE SETUP BUTTONS. Setup the inputs 1 ~ 2
7. 19 INCH EAR MOUNT PAIR. 19 inch case Ear Mount pair

SPECIFICATIONS