Atlona AT HD50SSa5 - Manual (Page 6)

6
1 2 3 4 5 6 7
AT-HD50RSL
1. Signal LED: Green LED will light up when receiving an HDMI signal.
The light will be off when receiving a DVI signal.
2. Signal optimizer: Change the level of the equalization for the received CAT5e/6/7
signal. Adjust until the video is optimized on the display.
0 to 7 (longest to shortest distance) adjusts picture and audio when receiving
digital audio.
8 to F (longest to shortest distance) adjusts picture and audio when receiving
stereo audio.
3. CAT5e/6 IN: Receive HDMI/DVI source signal from AT-HD50SS, AT-HD14SS,
AT-HD19SS, or AT-HD50RSL.
4. Audio OUT: Connect the 3.5mm cable to any analog audio device (AVR/Amp).
5. HDMI OUT: Loop out HDMI for in zone HDTV.
6. CAT5e/6 OUT: Connect to an AT-HD14SS, AT-HD19SS, AT-HD50SS, or another
AT-HD50RSL for cascading or an AT-HDRS or AT-HD15SRS for connection to
an HDTV.
7. 5V DC: Connect to the included power supply.
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515