Atlona AT HDMI 44M - Manual (Page 5)

2 3
4.2 Rear Panel
4.3 Remote Control
1. IR IN Socket:
Plug the IR extender sensor (optional) into the socket for IR extension control.
2. RS-232 Communication Port:
Connect to the COM port of your PC for the distant control over RS-232 channel.
3. HDMI™ outputs:
Connect each of these output ports to the HDMI™ input of an HDMI™ display.
4. HDMI™ inputs:
Connect to the HDMI™ output of your source equipment such as DVD player or set-top-
box.
5. HDMI™ outputs:
Connect each of these output ports to the HDMI™ input of an HDMI™ display.
6. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.
1. Power:
Press the button to turn on/off the unit.
2. Input Select for HDMI™ OUT A:
Press 1, 2, 3 or 4 to select the desired input source for HDMI™
OUT A.
3. Input Select for HDMI™ OUT B:
Press 1, 2, 3 or 4 to select the desired input source for HDMI™
OUT B.
4. Input Select for HDMI™ OUT C:
Press 1, 2, 3 or 4 to select the desired input source for HDMI™
OUT C.
5. Input Select for HDMI™ OUT D:
Press 1, 2, 3 or 4 to select the desired input source for HDMI™
OUT D.
4 5 1 3 6
2
RS-232
IR IN
HDMI
OUTPUT
A B
HDMI
OUTPUT
C
DC 5V
D
HDMI
INPUT
1 2 3 4
OUTPUT
A
OUTPUT
D
OUTPUT
C
OUTPUT
B
POWER
1
2
3
4
5