Atlona AT HDRP - Manual (Page 5)

4 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Input Panel
1. CAT5/6/7 INPUT: Connect to the RJ45 port on the Sender unit such as AT-HD-V40SS, ATHD14SS, AT-HD19SS, AT-
HD50SS, AT-HD50RSL, AT-DVI40SRS with a solid Cat5/5e/6/7 UTP/STP cable
2. +5V DC: Connect to 5V DC power supply unit.
Output Panel
1. CAT5/6/7 OUTPUT: Connect to the RJ45 port on the Receiver unit such as AT-HDRP, AT-HD-V40RS, AT-HDRS, AT-
HD15SRS, AT-DVI15SRS, and AT-DVI40RS with a solid Cat5/5e/6/7 UTP/STP cable
2. EQ: Dial the 8-level signal equalization control to the received HDMI signals. The HDMI signal level varies from MAX
(strongest) to MIN (weakest) for respective transmission length from longest possible range to short distance. Always
dial the EQ from MIN to MAX and stop turning the rotary switch whenever the audio/video is playing normally. Inap-
propriate EQ setting may cause overpowering issues that would shorten the product’s life significantly!
PANEL DESCRIPTION