Atlona AT HDSDI500 - Manual (Page 4)

SPECIFICATIONS
Technical
Role of usage Pattern generator
SDI standards SD-SDI & HD-SDI
Auto HD/SD-SDI detection Yes
Supported protocols SMPTE 259M (270Mbps / 360Mpbs), DVB ASI (270Mbps)
SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
Video bandwidth 1.485Gpbs & 1.485/1.001Gbps
Data rates 143 / 270 / 1483 / 1485 Mbps
Video support [HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30
[SD] [email protected], PAL@50Hz
SDI signal type SMPTE-292M, SMPTE-259M, DVB-ASI
Output impedance 75
Cable (Belden 1294A)
equalization / transmission
[HD-SDI] up to 150m (500ft)
[SD-SDI] up to 300m (1000ft)
Audio support No
PCB Stack-up 4-layer board [impedance control — differential 100 ; single 50 ]
Input None
Output 2x BNC [SDI]
BNC connector 75 interlocking socket
Eye pattern characteristics Amplitude: Within 800mV ±3% (<10%); Rise overshoot: Less than 2% (<10%);
Fall overshoot: Less than 2% (<10%); Long time jitter: 0.195μ (<1.0μ);
Timing jitter: 0.195μ (<1.0μ); Alignment jitter: 0.127μ (<0.2μ)
Mechanical
Housing Metal case
Dimensions
[L x W x H]
Model 160 x 110 x 20mm [6.3” x 4.3” x 0.8”]
Package 330 x 200 x 95mm [1’1” x 7.9” x 3.7”]
Carton 495 x 440 x 380mm [1’7.5” x 1’5.3” x 1’3”]
Weight Model 325g [11.5oz]
Package
Fixedness Interlocking power supply
Power supply 5V 4A DC
Power consumption 10 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
Note: The measurement results are from Tektronix WFM-7120 with SDI through 1m (3.3ft) long Belden 1694A.
2