Atlona AT LINE PRO2 - Manual (Page 4)

4.1 Front Panel
1. POWER Button and LED Indicator:
Press the button to turn ON/OFF the power of the unit. The LED will illuminate when the power is
turned on.
2. IR remote control sensor.
3. Input Selection Buttons and LED Indicators:
Press each of the buttons (CV/SV/COMP/PC/HDMI) to select the desired input source.
The LED will illuminate when the corresponding input is selected.
4. MENU Button:
Press the MENU button to bring up OSD operation menu (see section “4.3 OSD Operation”for reference.)
5. +/- Buttons:
On the first tier of OSD menu, use + and - buttons to move up/down the highlight item for selection.
b. Once the desired option is selected, use + and - buttons to toggle between setting values.
6. ENTER Button:
In OSD menu, use the ENTER button to confirm the selection
OPERATION CONTROLS AND FUNCTIONS
1 2 3 4 5 6
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3