Atlona AT PRO2HD88M - Manual (Page 4)

Toll free: 1-877-536-3976
Local: 1-408-962-0515 4 atlona.com
Specifications
Before You Start
Remote Control
Bandwidth frequency 6.75 Gbps
Input Ports 8 x HDMI (Female Type)
9 x IR 3.5mm
1 x Firmware update
8 x 3.5mm Stereo Audio
Output Ports 8 x CAT 5e/6/7
1 x RS-232
9 x IR 3.5mm
Resolution outputs Video: up to 1080p@60Hz
Vesa: up to 1920x1200
Dimensions (HxWxD) 6.93x18.98x14.27 (inch) or 176x482x362.5 (mm)
Weight 21.61lbs or 9.8 kg
Temperature -4°F to 158°F or -20°C to 70°C
Power consumption 60W
Output selection. Numbers correspond with the CAT5e/6/7
category cable outputs on the matrix. The same remote is used
for the AT-PRO2HD88M as the AT-PRO2HD1616M. For AT-
PRO2HD88M only 8 I/O buttons will be functional.
Input selection. Numbers correspond with the HDMI inputs on
the matrix. The same remote is used for the AT-PRO2HD88M as
the AT-PRO2HD1616M. For AT-PRO2HD88M only 8 I/O buttons
will be functional.
Arrow buttons are not functional for this product.
• Make sure when connecting the CAT5e/6/7 cables a 568B termination method is used.
• Avoid using patch panels and wall plates during initial set up and testing of the matrix switcher.
• Make sure the matrix is connected to a component surge suppressor and line conditioner.
Note: Atlona’s warranty does not cover damage due to electrical disturbances. A component surge
suppressor and line conditioner are highly suggested especially in areas with electrical storms.
• Be sure you’re using a mono to mono (2 conductor) 3.5mm IR cable (i.e. AT-MINIMONO6 - available
to purchase at Atlona.com) when using IR output control from 3rd party controllers, stereo (3
conductor) 3.5mm cables are not compatible.