Atlona AT PROHD RP - Manual (Page 4)

PANEL DESCRIPTIONS
OPERATION
2
1. CAT-5E input1 and 2.
2. Input Power LED. When input is powered on, the LED lights up
3. Signal connection LED. When signal connects properly, the LED lights up
4. IR Input
5. HDMI Output
6. Power, 5VDC
7. CAT-5E output1 and 2.
1) Connect two CAT-5E cables with both outputs of Main Sender Unit (AT-PROHD88M-S) with
the CAT-5E inputs of the Repeater unit (AT-PROHD-RP).
2) Connect the two CAT-5E cables with both outputs of Repeater Unit (AT-PROHD-RP) with the
inputs of Main Receiver Unit (AT-PROHD88M-R)
1 4
5
6
7
2
3