Atlona AT PROHD85M SR - Manual (Page 5)

4 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2. Rear Panel
1. HDMI inputs 1-4 7. IR Ext port (extension)
2. RJ45 CAT5 outputs 1-4 8. Internal EDID dip switch
3. HDMI inputs 5-8 9. RS485 port
4. RJ45 CAT5 output 5 10. TCP/IP port
5. 12V power input 11. RS-232 port
6. IR TX emitter ports 1-8
HDMI Receiver (5 x Receivers included)
Note: Please make sure when connecting Cat5e-1 and -2 receiver ports that they are matched to the corre-
sponding RJ45 Ports on the AT-PROHD85M-SR. Receiver Cat5e-1 should be plugged into Matrix RJ45-1 and
Receiver Cat5e-2 should be plugged into Matrix RJ45-2.
The red status indicator will stay lit on the receiver if the HDMI cable connection senses sync from the display.
If it doesn’t receive sync from the display the light will be off.
1
2 4 7 9 10 11
8
5 3 6