Atlona AT VGA100 WPVGA - Manual (Page 4)

Max. Distance via CAT5 Cable:
• 640x480 pixels (15MHz) – 430ft
• 800x600 pixels (30MHz) – 320ft
• 1024x768 pixels (60MHz) – 250ft
• 1280x1024 pixels (100MHz) – 200ft
• Connect transmitter module to the VGA connection of a computer
• Connect display to the receiver module
• Install or use pre-existing CAT5, 6 or 7 cables
• Make sure to use a cable tester to check all wires are correctly terminated. (Incorrect Termination may
cause damage to the receiving module)
• Once connected, please refer to the Mode and Dip switch configuration
SPECIFICATIONS
CONNECTION AND OPERATION
AT-WPVGA-SA T-WPVGA-RA T-VGA100-SA T-VGA100-R
Inputs 1 x VGA 1 x RJ45 1 x VGA 1 x RJ45
Outputs 1 x RJ45 1 x VGA 1 x RJ45 1 x VGA
VGA Type (HD15) female
VGA Resolution 800x600, 1024x768, 1280x768 and 1280x1024
Signal Bandwidth 300 kHz max.
Signal Loss Less than 3dB per pair
Transmitting Distance up to 330ft (100m)
Dimensions (inch) 2.75x2.40x4.52
– Single Gang
2.75x2.40x4.52
– Single Gang
4.3x3.03x1.02 4.3x3.03x1.02
Weight (lb) 0.15
Operation Temperature 0 to 55 o C
Storage Temperature -20 to 85 o C
Humidity up to 95%
Transmitter:
Receiver:
ANY TRANSMITTER IS COMPATIBLE
WITH ANY RECEIVER
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3