Dual XDVD710 - Manual (Page 25)

XDVD710 OPERATION
4
XDVD710 OPERATION
GENERAL Setup - Setting the Anti-theft code
By default Anti-theft password is 0000
and is turned Off. To turn this
feature on, follow the steps below.
CAUTION!!
This will lock your unit from operating
if battery POWER is disconnected for
more than 5 minutes.
Step 1 & 2
Step 3 & 4
Step 5 & 6
Step 7 & 8
Step 9 & 10
1) Touch top left corner of screen ) Touch GENERAL Setup button
3) Touch down arrow button 4) Touch ----
5) Enter 0000, then press ok 6) Touch OFF
7) Touch ON 8) Touch ---- again
9) Enter your new 4-digit password,
then press ok.
10) Touch RETURN to exit
L
L
1
L
3
L
4
Note: it is
recommended that
you choose your own
4-digit password
carefully, write it down
somewhere and keep
in a safe location. In
the event you ever
loose or forget your
password, call our tech
hot line for support
on how to unlock your
system.
L
L
5
6
L
7
L
8
L
9
L
10