American Weigh Scales (AWS) BioWeigh-USB - Manual (Page 4)

4
IV. Battery Installation
This scale should come with batteries in the box. To
install the batteries, turn the scale over and remove the
battery cover. Insert two (2) AAA batteries according to
the diagram inside the battery compartment. Replace the
battery cover.
V. Turning the Scale On and Off
This scale has a “tap to weigh” function. First tap the
scale with your foot to wake it from sleep mode before
weighing.
VI. Setting the Weighing Unit
To change the current weighing unit, use the “kg/st/lb”
button on the bottom of the scale. The display can change
between kg -> lb -> st.
VII. Setting the Clock
Press and hold t • he SET key to enter clock setup.
The year will being to flash. Use the UP and DOWN key •
to select the current year then press SET to confirm.
The month will being to flash. Use the UP and DOWN •
key to select the current year then press SET to confirm.
The day will being to flash. Use the UP and DOWN key •
to select the current year then press SET to confirm.
The hour will being to flash. Use the UP and DOWN key •
to select the current year then press SET to confirm.
The minute will being to flash. Use the UP and DOWN •
key to select the current year then press SET to confirm.