American Weigh Scales (AWS) CQ-350 - Manual (Page 3)

I. WEIGHING
Place Scale on a flat, level surface.
1. Press [ ON/OFF ] key to turn the scale on.
2. Wait until "0.0” is displayed.
3. Place the object(s) to be weighed onto the weighing
platform.
4. By pressing the [ MODE ] key, you can switch
between weighing units.
II. PRICE CALCULATING
1. The scale starts up in Price Calculating mode by
default. To switch back to Price Calculating mode from
Weighing, or Calculator mode, press the [
] key.
2. The display will show "SUM", "PRI", and "0.0g".
3. Place the object(s) to be weighed onto the weighing
platform.
4. Enter the unit price using the numeric keypad. The
unit price will be displayed after "PRI". The total price
will be displayed after "SUM". Weight is still displayed
on the top line.
5. To clear the unit price, press the [ CE ] key.
6. The [ AC ] button can be used to lock the weight.
Press once more to unlock.
Note: The “+”, “ –” , “x”, “÷”, “=” , “%”, “M”, “MC” and
“MR” keys are invalid in this mode.
III. WEIGHT ONLY
1. Press [ ON/OFF ] key to turn the scale on.