American Weigh Scales (AWS) PN-201C - Manual (Page 7)

7
PN-Series Manual
2.4 Turning on the Balance and Self-testing
1. Connect the AC adapter to an available wall socket and plug the other end of the cable into the balance.
2. Press the ON / OFF key to turn the scale on. A display test will be performed (5 seconds).
3. Once the display shows “0.0g” the balance is ready to use.
4. To turn the scale off, press the ON / OFF key.
2.5. Underweighing
This balance is equipped with an underweighing feature that allows you to suspend items from an
attachment below the balance. To use this feature, the balance should be supported in a way that allows the
items to hang below the scale. This feature is useful for procedures such as specific gravity calculations.
NOTE: You should let the balance warm up for 20 ~ 30 minutes before use for best results.
Underweighing Attachment