Alto Professional PS 5 LITEPACK EVO - Manual (Page 4)

2
3. POSITIONING
PS4/5 LITEPACK ACTIVE SPEAKER
Make all initial connections with all the equipment powered off, and ensure
that all the main volume controls are turned down completely.
1). Connect one side of the signal cable at your audio mixer into output left
/Right (with Stereo-Jack or XLR) and the other side of the cable into the
line input (COMBO) of your active speaker cabinet (with Stereo-Jack or
XLR).
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control of the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust
the main mix level control to manipulate the output level.
6). After using, turn off your active speaker cabinets first, then the mixer.
HOOK
UP
Signal Cable
Power Cord
Tripod
Mount
Main Mix
Left
Output
MIXER
Tripod
Mount
Power Cord
Right
Output
Main Mix
Signal Cable