Dolby Laboratories TFDVD 3295 - Manual (Page 21)

16
PC Function
You can use the unit’s TFT LCD as your computer’s monitor.
Shut down both units and connect the VGA jack and PC Audio In jack. See the “Cable Connection” 1.
section.
Turn on units and press the SOURCE button to select VGA
2.
System Setup Menu
Various features can be preset through the system menu.
Press MENU display the system menu. •
Press the left/right direction button to select the desired sub-menu, press OK or the down direction button •
to enter.
While working with the menu
Press the up/down direction buttons to select the desired item. 1.
Press the left/right direction button to adjust. 2.
Press MENU to exit/back up the menu. 3.
NOTE: Please see the TV section for menu descriptions
PC Function
Adjust the PC Screen
Upon switching to the PC mode, the moniter will be automatically regulated for a
proper functioning. If the result is not up to your expectation, please perform the
following steps to adjust the screen manually .
Enter “VGA Settings” from the Option menu, select “Auto” and press the 1.
right direction button to adjust the monitor automatically.
Or if you still have problem with the monitor after, adjust “H-Position”, 2.
“V-Position”, ”Clock“ as well as “Phase” accordingly under the VGA Settings
menu.