Specifications – Alto Professional TS115A User Manual
Page 8
SPECIFICATIONS
Output Power:
400 W Continuous RMS (335 W LF Class D + 65 W HF Class AB)
800 W Peak (670 W LF + 130 W HF)
Crossover: 2 kHz
Max SPL @ 1m:
122 dB Continuous, 125 dB Peak
Frequency Response:
48 Hz – 18 kHz (@ -10 dB)
Low Frequency:
15" (381 mm) woofer, 2" (51 mm) voice coil
High Frequency:
1" (25 mm) neodymium driver
Coverage:
80°/100°
H
x
60°
V
nominal
Connectors:
Input: 1/4" TRS or XLR
Link: XLR
Cabinet:
Polypropylene,
trapezoidal
External Control:
Volume control, power-on with LED, clip limiter with LED, ground lift
Power supply:
100-120V/220-240V,
50/60
Hz
Dimensions (H x W x D):
26.7" x 16.9" x 15.2" (679 mm x 430 mm x 385 mm)
Weight (speaker only):
48.6 lbs (22 kg)
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Inrush current at initial switch-on: 3.61 A
Inrush current after power supply interruption: 3.91 A
www.altoprofessional.com
MANUAL VERSION 1.4