ABUS Technologies Tempsee Infra Red Thermometer - Manual (Page 4)

ABUS TECHNOLOGIES INC.
4
Tempsee
1. INTRODUCTION
Tempsee is the ultimate tool for temperature measurements. It contains 2 most
reliable temperature sensors: Non-contact Micro Machining Thermopile and
K-type thermocouple socket. Such an arrangement can fulfill most of temperature
measurement requirements. Use the Non-contact for instant; not-reachable situation.
Use the thermocouple for high precision; non-surface situation.
Tempsee also come with an ultra long battery life (8days for Alkaline battery),
no 9V battery. It uses the most affordable and available AAA size battery. Learn
Emissivity with the Tempsee: Emissivity is a difficult concept for general user to catch.
But, with Tempsee, it's easy to get, just use the contact thermometer to get the true
temperature. Then use the Non-contact to get the surface temperature, Adjust the
Emissivity until they are the same.
2. PRESENTATION
2.1 Features
1. NIST traceable.
2. Certificate of Calibration Available (COC Optional).
3. IR-SoC technology (Infrared System on Chip) and Batch Calibration technology drive the
dimensions and cost to the lowest limits.
4. New Low voltage technology, no more 9V battery.
5. D:S Ratio 12:1
6. Use the most affordable and available battery: AAA size, instead of the low capacity 9V battery.
7. Long Battery Life.
Note: With Laser and Backlit turned off
For Alkaline Battery (1150mAh): Typical 8days.
8. Large LCD Screen, with bright amber color Backlit
9. Friendly User Interface: 5-Key ( with Emissivity Fool Proof Function )
10. With high-end arithmetic: Max;Min and DIF; AVG mode
11. Auto Power Off time is 15sec
12. Precision K type Thermocouple Thermometer available (optional)