Dimensions – ABUS Technologies MG Low Differential Pressure Gauge User Manual
Page 5
ABUS TECHNOLOGIES INC.
5
MG
2.2 Technical Parameters
Service:
Air and non-combustible, compatible gases
Ranges:
Refer Ordering Table below.
Accuracy:
±2% of full span at 21°C (±3% on MG-0.50IN, MG/Z-0.5IN, MG-
10MM, MG-100Pa, MG-125Pa and ±4% on MG-0.25IN, MG-6MM,
MG-60Pa ranges).
Ambient Temperature:
-7 ~ 60°C
Pressure Limit:
-68 ~ 100KPa
Overpressure:
Relief plug opens at approximately 25Psig (172KPa)
Process Connections:
1/8″ female NPT duplicate high and low pressure taps: one pair side
and one pair back
Case and Bezel Material:
Die cast aluminum
Weight:
460g
Dial Size:
4″ Diameter
Mounting Position:
Vertical
Standard Accessories:
Two 1/8″ NPT plugs for duplicate pressure taps, two 1/8″ pipe thread
to rubber tubing adapter, and three flush mounting adapters with
screws.
3. DIMENSIONS
All Dimensions in mm