Dynalink Wireless LAN Client USB WLL013 - Manual (Page 7)

WLAN PCMCIA Card/USB Adaptor Quick Set-up Guide
Power Red On The adaptor is plugged into your computer
Activity Green Blinking Transmission mode. The faster blinks,
the higher the data rate
LED COLOUR STATE D E S C R I P T I O N
supply the MAC address of your adaptor to the network administrator for inclusion
into the access point’s list of authorised users. The MAC address of your adaptor
is printed on a barcode label affixed to the product. The label reads MAC:009096-
xxxxxx. 009096 is the first half of the address.
Uninstalling the device and software
Removing adaptor hardware from computer
It is recommended that you follow the standard Windows procedure for
disconnecting a PCMCIA or USB device from your computer.
1. Double click the Safely Remove Hardware icon on system tray.
2. Select the device, click Stop and then OK.
3. When the safe to remove message is displayed, click OK and remove device.
Uninstalling the wireless adaptor software
Please remove the adaptor before uninstalling software. Windows XP users who
are using the Windows built in utility will not require this procedure.
1. Exit from all currently running programs.
2. Go to Start - Programs - Wireless LAN Card - Configuration & Monitor Utility.
3. Click Uninstall Configuration & Monitor Utility.
4. Click OK to confirm removal and Finish.
Indicators and Antenna
Wireless adaptor status lights
The two lights indicate connection status and data transfer status:
5
6
External antenna on the WLL013 USB adaptor
The USB adapter comes with one powerful external antenna. It can be rotated
from 0 to 180 degrees to obtain the best possible connection quality.