Dynex DX-400WPS - Manual (Page 2)

f. Reconnect all power supply cables. Make sure that each connection is
secure. Reference your notes from when you removed the old power
supply to make sure you are making all connections which were
previously in place.
a. Connect the 20+4-pin main power connector to your
motherboard.
b. Connect the 8-pin (4+4) or 4-pin +12 V power connectors to your
motherboard.
c. Connect all of the following that apply to your computer:
i. The 4-pin peripheral device power connector to any
peripheral device with a 4-pin connector.
2