SoundMax SM-CMD3004 - Manual (Page 16)

16
General operation
Power ON/OFF
Press POW button on the front panel or POWER button on the RC to turn the unit on . Press it again to turn the
unit off.
Mode Selection
Press MOD/MUT button on the front panel or MODE button on the RC to cycle the Play Mode: AUX => TUNER
(RADIO) => DISK => USB => CARD.
NOTE: USB, CARD, DISK mode will be active only when an USB flash memory, CARD or DISC are inserted.
Audio settings adjustment
Press the SEL button (VOL knob) on the front panel or SEL button on RC until the display shows: VOL => BAS
=> TRE => BAL => FAD => LOUD => LOC => ST => EQ. Rotate the VOL knob or press VOL+/VOL- buttons on
the RC to adjust each mode.
Loudness control
Press the VOL knob/SEL button until “LOUD OFF” is shown. Turn the volume knob to select between ON or OFF.
EQ setting
You can choose equalizer sound effects. The sequence of settings: EQ OFF => POP => ROCK => CLAS.
NOTE: Bass (BAS) and Treble (TRE) controls are unavailable only when EQ is OFF.
Mute function
Press and hold the MOD/MUT button on the front panel or press MUTE button on the RC to turn off the sound.
Press it again or VOL +/- to resume.
Subwoofer control
Press and hold the BND/ SUB/NP button to activate the subwoofer control. An external amplifier is required to
operate a subwoofer.