MIPRO mr123da(2ce229) - Manual (Page 2)

FEATURES:
Carrier FrequencyRange VHF
ReceivingMode
CPU-controlleddiversity.Dual Pilotone&NoiseLock squelchprevent random noise
interference sourceslikecomputers,karaokemachinesand D VDplayers.
“ ”
Entry-levelprofessionalswithlimitedbudget.
Receiverfeaturestheseuniquepatenteddesigns:
1.Firstreceiverequippedwithabalancedvolumecontroltoenableuserstoadjustthe
mixedoutputvolumeof twowireless microphones. Thesystem'sdefaultoutputlevel
isaccuratelypre-adjustedtomatchthemicrophonecapsule'ssensitivityand
designed todeliveranoptimalperformancewithoutoverloaddistortion.
2.Firstreceiverequippedwitha"receivingsensitivity adjustor"on thereceiverfront
paneltoallowuserstoadjust toahighersensitivityinordertoincreasereceiving
distanceandtoeliminatesignaldropouts,ortoadjusttoalower sensitivitytoavoid
noiseinterference.
3.Firstreceiverequippedwitha"NOISE"LEDindicator.Userscanfirstidentify
whetherthereceiveris experiencing interferenceandcan thenmakeaccurate
adjustmentsinthereceiver'ssensitivitytoeliminatetheinterferenceandestablish
optimalperformance.
4.ThereforeandAFsignalindicatorstoidentifyifthesystemisreceivingsignals
properly.
ApplicationsApplications
Front Panel
1 2
Thank you for selecting MIPRO dual channel wireless microphone system.
Before operatingpleaseread this instruction manual carefully and thoroughly in
order to attain the correct operating procedures and achieve the best results.
This system is a dual channel wireless receiver with two microphones .
MIPRO designs a sophisticated CPU inside the system that can automatically
differentiate the receiving signal strength from the 2 antennas of the receiver.
When an antenna is at its "Receiving DeadPoint"and noise interference starts,
the CPU will automatically adjust the system to the antenna that hasstronger
signal receiving to avoid signal dropouts and noise interference a t themoment
when the wanted signal falls below noise signal. The system has a "NOISE"
indicator to display if the system is under interference and a newly-added
balance adjuster (2) to adjust the volume of both microphones.
(3) (2) (5) (7) (9) (4) (6) (8) (10) (1) (11)
POWER
0
(1) Power Switch & Indicator: When switch is turned on, red indicator
illuminates to denotenormal power status.
(2) Microphone Balance Volume Adjuster: Allow users to adjust the mixed
volume level of two microphones to a balanced or different level.
Adjuster is factory preset for balanced level.
(3)(10) Sensitivity Adjuster: To adjust receiver sensitivity thatensures no noise
output if receiver is not receiving signals from transmitters.
(4)(9) Noise Indicator: To display if the system is under interference.
(5)(7) RF Signal Indicator: Indicates received RF signals from transmitters.
(6)(8) Audio Signal Indicator: Indicates the microphone signal.
(11) Rackmount Bracket: To install thereceiver into a n E IA 19-inch
standard rack case.
DUAL CHANNEL WIRELESS RECEIVER DUAL CHANNEL WIRELESS RECEIVER
1. PARTS NAME AND FUNCTIONS
A. Front Panel
① × Audio O utput Cable 2
③ × Antenna 2
② × Instruction Manual 1
④ × AC/DC Adapter 1
This system includes the following accessories:
Fig.1