MIPRO ma101 - Manual (Page 5)

- 2 -
(5) Power Indicator: Red light illuminates when power is
turned on to denote normal power status. Green light
indicates a RF link (it is receiving signal).
(6) Microphone Volume Control: Volume control for the
wired microphone.
(7) Charging Indicator:
(8) Line Out: Allows you to send audio signal (AF) to an
external amplifier.
(9) Auxiliary Input Jack: Uses 3.5mm "minijack" plug.
Accepts external audio inputs, such as portable cassette
and CD players.
(10) DC Power Input Jack: Plug into DC charger (supplied) for
battery charging. The inner conductor is positive and
should be connected to 18VDC 10%, +2.5A.
(11) Body: Houses all electronic components.
(12) Shoulder Carry Belt: May be stored inside the Battery
Compartment.
(13) Battery Compartment: The rechargeable battery is located
behind the battery compartment door.
(14) Microphone Stand Mount: For convenient mounting on a
standard 35mm threaded microphone stand.
Red light indicates the battery is weak and needs
charging. Charging takes minimum 4 hours.
Green blinking light indicates charging is in progress.
Solid green light indicates the battery is fully charged.
This system is equipped with auto cut-off charger.
When battery is weak (red light), power will cut-off
automatically to avoid any damages that could cause by
power over-drain.