Dual MXC22 - Manual (Page 2)

2
®
MXC22 INSTALLATION
Preparation
KEYS
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal.
(consult a qualified technician for instructions)
• Avoid installing the unit where it would be subject to high temperatures,
such as from direct sunlight, or where it would be subject to dust, dirt or
excessive vibration.
Getting Started
• Insert the supplied keys into the slots as shown, and slide the unit out of
the mounting sleeve.
• DIN mounting procedure:
Install mounting sleeve into radio opening, bending tabs to secure.
• 2-Shaft mounting procedure:
Remove knobs, faceplate and DIN mounting adapters from unit.
Install unit into kit or radio opening from behind. Adjust rear shaft nuts to
correct depth. Install faceplate and knobs.
• Certain applications may require an installation kit and/or wiring harness
adapter (sold separately).