beautypg.com

Tire inspection, Tire rotation, Tire inspection -57 tire rotation -57 – Saturn 2010 VUE User Manual

Page 323

background image

Vehicle Care

10-57

8. Proceed to the driver side rear

tire. The driver side rear turn
signal lamp comes on. Repeat
the procedure in Step 5.
The horn sounds two times to
indicate the sensor identification
code has been matched to the
driver side rear tire, and the
TPMS sensor matching process
is no longer active.

9. Turn the ignition switch to

LOCK/OFF.

10. Set all four tires to the

recommended air pressure
level as indicated on the Tire
and Loading Information label.

11. Put the valve caps back on the

valve stems.

Tire Inspection

We recommend that you
regularly inspect your vehicle's
tires, including the spare tire,
if the vehicle has one, for signs
of wear or damage. See When It
Is Time for New Tires on
page 10‑58
for more information.

Tire Rotation

Tires should be rotated every
8 000 to 13 000 km (5,000 to
8,000 miles). See Scheduled
Maintenance on page 11‑2
.

The purpose of a regular tire
rotation is to achieve a uniform
wear for all tires on the vehicle.
This will ensure that the vehicle
continues to perform most like it
did when the tires were new.

Any time you notice unusual
wear, rotate the tires as soon
as possible and check wheel
alignment. Also check for
damaged tires or wheels.
See When It Is Time for New
Tires on page 10‑58
and Wheel
Replacement on page 10‑64
.

When rotating the vehicle's tires,
always use the correct rotation
pattern shown here.