Zone variation change procedure -9 – NISSAN 2008 Rogue User Manual

Page 75

Black plate (75,1)

Model "S35-D" EDITED: 2007/ 7/ 3

SIC0611B

Zone map

ZONE VARIATION CHANGE PROCE-
DURE

The difference between magnetic north and
geographical north is known as variance. In
some areas, this difference can sometimes be
great enough to cause false compass readings.
Follow these instructions to set the variance for
your particular location if this happens:

1. Push the

switch for more than 3

seconds. The current zone number will
appear in the display.

2. Find your current location and variance

number on the zone map.

NOTE:
Use zone number 5 for Hawaii.

3. Push the

switch repeatedly until the

new zone number appears in the display,
then release the switch. After you release
the switch, the display will show a compass
direction within a few seconds.

. If the compass deviates from the correct

indication soon after repeated adjust-
ment, have the compass checked at a
NISSAN dealer.

. The compass may not indicate the

correct compass point in tunnels or
while driving up or down a steep hill.
(The compass returns to the correct

Instruments and controls

2-9