How to use remote keyless entry system -6 – NISSAN 2008 Xterra User Manual
Page 130
![background image](https://www.manualsdir.com/files/764065/content/doc130.png)
HOW TO USE REMOTE KEYLESS
ENTRY SYSTEM
Locking doors
1. Close all windows.
2. Remove the key from the ignition switch.
3. Close the hood and all doors.
4. Push the
button on the keyfob. All
the doors lock. The hazard warning lights
flash twice and the horn beeps once to
indicate all doors are locked.
● When the
button is pushed with
all doors locked, the hazard warning lights
flash twice and the horn beeps once as a
reminder that the doors are already
locked.
● If a door is open and you push
the
button, the doors will lock
but the horn will not beep and the hazard
lights will not flash.
The horn may or may not beep. Refer to “Silenc-
ing the horn beep feature” later in this section for
details.
Unlocking doors
Push the
button on the keyfob once.
● Only the driver’s door unlocks.
● The hazard warning lights flash once if all
doors are completely closed with the ignition
key in any position except the ON position.
● The interior lights illuminate for 30 seconds
when the interior light switch is in the normal
operation position.
LPD0209
LPD0210
3-6
Pre-driving checks and adjustments
੬
REVIEW COPY—
2008 Xterra (xtr)
Owners Manual—USA_English (nna)
06/26/07—debbie
੭