Variable voltage control system -15 drive belt -15 – NISSAN 2009 Titan User Manual
Page 319
CAUTION
● Do not ground accessories directly to
the battery terminal. Doing so will by-
pass the variable voltage control sys-
tem and the vehicle battery may not
charge completely.
● Use electrical accessories with the en-
gine running to avoid discharging the
vehicle battery.
Your vehicle is equipped with a variable voltage
control system. This system measures the
amount of electrical discharge from the battery
and controls voltage generated by the generator.
The current sensor
᭺
A
is located near the battery
along the negative battery cable. If you add elec-
trical accessories to your vehicle, be sure to
ground them to a suitable body ground such as
the frame or engine block area.
1.
Power steering fluid pump
2.
Automatic belt tensioner
3.
Water pump
4.
Cooling fan
5.
Air conditioner compressor
6.
Crankshaft pulley
7.
Generator
WARNING
Be sure the ignition key is in the OFF or
LOCK position before servicing drive belt.
The engine could rotate unexpectedly.
WDI0566
WDI0661
VARIABLE VOLTAGE CONTROL
SYSTEM
DRIVE BELT
Maintenance and do-it-yourself
8-15
੬
REVIEW COPY—
2009 Titan (tzw)
Owners Manual—USA_English (nna)
02/19/08—tbrooks
੭